According to different scenarios, the height of solar street lights is not arbitrarily defined, and there are certain height regulations. So, how to choose the height of the light pole when purchasing solar street lights?

Generally speaking, the height of the solar street light pole is 4 meters, 5 meters, 6 meters, 7 meters, 8 meters, 9 meters, 10 meters, 11 meters, 12 meters, etc. When selecting its pole height, it is generally determined based on the width of the road surface. If the street light is installed on one side, the height of the solar street light pole should be consistent with the road width, or its height should be less than 1 meter of the road width.

The conventional street light power and the height of the street light pole generally have a parameter value, which is defined after years of experience and practical needs.

6W (courtyard light): light pole height of 3 meters;

8W (courtyard light): light pole height 3.2 meters;

10W (courtyard light): light pole height of 3.5 meters;

12W (courtyard light): light pole height of 4 meters;

15W, 18W, 21W, 24W solar street lights: pole height of 5 meters, road width of 6-8 meters;

30W, 36W, 42W solar street lights: pole height of 6 meters, road width of 8-10m (2 lanes);

42W, 56W solar street lights: pole height 7-8 meters, road width 10-15 meters (3 lanes);

56~77W solar street light: The light pole height is 8 meters, and the road width is 16 meters (4 lanes).

The height range of the solar street light pole above is for reference only, and users should choose according to the actual situation. Choosing a suitable street light pole can fully utilize the lighting value of solar street lights.

Technical requirements for light poles:

1. Comply with the current national standards for street light acceptance.

2. The inner and outer surfaces of the light pole are treated with hot-dip galvanizing anti-corrosion and then sprayed with plastic. The color is based on the rendering, and the surface is smooth without discoloration, needle holes, sagging, or peeling; The thickness of galvanizing shall not be less than 85 microns, and the thickness of spray molding shall not be less than 100 microns.

3. The support rod and crossbar are made of high-quality low-carbon steel, without obvious marks such as dents, and are hot-dip galvanized and sprayed with plastic, just like the main rod.

4. The flange plate is formed by plasma cutting, with a smooth and clean periphery, no burrs, beautiful appearance, and accurate hole positions.

5. The electrical door adopts plasma cutting, with accurate dimensions, smooth and flat surface, and is welded with anti-theft and grounding devices.

6. The quality of copper core terminal blocks meets the national electrical industry standards.

7. The design wind speed of the street light is greater than 35 meters/second, and the seismic resistance is greater than Level 8, ensuring that the entire pole of the street light works normally in adverse weather conditions.

shinetoo has been developing the individual components for over 9 years to make highly reliable Street lighting networks all over the world.Have a professional pre-sales and after-sales team.we provide various specifications and power of solar street lights,explosion-proof and durable.our lights are built better and last longer.