LED linear high bay lights are generally used for lighting larger areas indoors, usually 15-45 feet from the floor, where the huge space from the ceiling to the floor requires a larger lumen output light for illumination because the LED linear high bay light is rectangular, he can be suspended by cables or chains, because its shape is not round.

Linear high bay lights have a very high practical value. They are used for commercial and industrial lighting for large warehouses, factories, superstores, large offices, indoor entertainment, gyms, hotel lobbies, and hospitals. These indoor spaces are relatively wide and high, so they need to use LED linear HIGH BAY lights to illuminate.

LED linear HIGH BAY lights have been developed for many years. LED lights and HID lights are very different. LED lights emit three times more light at the same power, are very energy-saving, and have a service life of 50,000 hours. Long-term use can be left a lot of labor costs and the cost of replacement bulbs later.

A high bay light is usually defined as a light intended for use in a ceiling ranging from 20-40 feet in height from the floor.

High bay lighting uses common beam angles such as 60°, 90°, and 120°. A narrow beam helps to create a more focused beam that provides a high lux level on the floor. In contrast, a wider beam angle allows large open areas with lower roof height to have an excellent distribution of light.

Use 100 watts High Bay lights and space them out every 8-14 feet (8 for high brightness, 14 for adequate). A 6×3 pattern for example is 18 lights for basic lighting, or go 7×3 (or 6×4/8×3 depending on wiring) for 21-24 lights to get a medium brightness level.

The advantages of LED linear high bay lights have risen dramatically in recent years, and the disadvantages are basically absent.

1. As far as color rendering, color temperature, and lumen output (compared with the same wattage of other lamps), the lighting quality is the best choice, and the lighting is more stable.
2. Because it has a longer service life, the replacement frequency is very low, and they are also not allowed to rent the lift lamp, greatly saving a lot of money.
3. Although LED lighting costs more at the beginning of the purchase because they use much less energy than traditional lights, the cost has a surplus in the long run. Over time, this will save on utility costs. They also do not waste energy given off in the form of heat. Finally, the other lights listed above are omnidirectional, which means they produce 360 degrees of output. With linear LED workplace lights, the light must be directed downward and outward toward the floor. Much of this is wasted or needs to be directed using a reflector. LED linear high bay lights have a more focused beam, which means nothing is wasted.

For our standard products, there is no minimum order quantity, customers can order the required quantity flexibly according to their needs. If you need special material, process or design, LED custom products need to set a minimum order quantity.

We usually pay T/T with 30% deposit and the final payment is required before delivery.

Usually the delivery time is one week for samples and 15-20 days for bulk orders. The specific delivery time should be confirmed with the salesman.