Solar street lamps are lighting devices that use solar energy to generate electricity, which can provide lighting at night. Solar street lights typically consist of solar panels, batteries, controllers, LED lights, and wires. Among them, batteries are an important part of storing solar energy, while wires play a role in connecting various components. The following will introduce the connection method of solar street light wires with battery charging.

Firstly, we need to prepare the following materials and tools:

1. Wire: Generally used with a diameter of 2.5mm ² The appropriate length of wires can be selected according to actual needs.

2. Wiring terminal: used to connect wires and interfaces with solar panels, batteries, controllers, and LED lights.

3. Insulation tape: used at the connection of insulated wires to ensure safety and reliability.

4. Screwdriver: used for removing and installing wire connectors.

Next, follow the following steps to connect the wires:

1. Connect the solar panel:

a. Strip a section of insulation off one end of the wire to expose the metal wires inside.

b. Insert the wire into the positive and negative interface on the solar panel, ensuring it is securely inserted.

c. Use a screwdriver to tighten the screws on the interface and ensure that the wires are securely connected.

2. Connect the battery:

a. Peel off a section of insulation from the other end of the wire to expose the metal wires inside.

b. Insert the wires into the positive and negative terminals on the battery, ensuring they are securely inserted.

c. Use a screwdriver to tighten the screws on the interface and ensure that the wires are securely connected.

3. Connect the controller:

a. According to the wiring diagram on the controller, peel off a section of insulation from one end of the wire to expose the internal metal wire.

b. Insert the wire into the corresponding interface on the controller and connect according to the positive and negative poles.

c. Use a screwdriver to tighten the screws on the interface and ensure that the wires are securely connected.

4. Connect the LED light:

a. According to the wiring diagram of the LED light, peel off a section of insulation layer from one end of the wire to expose the internal metal wire.

b. Insert the wire into the positive and negative terminals on the LED light, ensuring that it is securely inserted.

c. Use a screwdriver to tighten the screws on the interface and ensure that the wires are securely connected.

5. Insulation treatment:

a. Use insulating tape to insulate the wire connections to ensure safety and reliability.

b. Check if all connections are secure and there are no loose or poor connections.

Finally, install the solar panel in an appropriate position to ensure sufficient sunlight reception. When the solar panel receives sunlight, the solar energy will be converted into electrical energy and stored in the battery. At night, the battery will supply power to the LED lights for illumination.

It should be noted that when connecting wires, the quality of the wires should be ensured to be good, and the metal part of the wire should be in close contact with the interface to avoid problems such as unstable current or short circuits caused by poor contact. In addition, attention should be paid to safety during the wiring process, ensuring that the wiring operation is carried out after power outage to avoid the risk of electric shock.

shinetoo has been developing the individual components for over 9 years to make highly reliable Street lighting networks all over the world.Have a professional pre-sales and after-sales team.we provide various specifications and power of solar street lights,explosion-proof and durable.our lights are built better and last longer.