G1S1 LED high mast lights

Series G1-S1 LED high mast flood Lights

LED G1S1 HIGH MAST LIGHTS are designed with asymmetric lighting distribution and can be installed on poles of different heights. The wattage is available in 100W, 150W 200W. With IP65 protection rating and IK10 impact resistance rating. Aluminum housing, 5mm tempered lens, 98% reflective aluminum. Suitable for outdoor lighting, port high mast lighting is trendy in Europe and the United States. Adopt high-quality chips and drivers. 140LM/W maximum lumen, easy-to-install floodlight on the pole, and safe and reliable. It can be used in sports field lighting (soccer field lighting, tennis court lighting, baseball field lighting). Port lighting, airport lighting, area lighting places, and meet the high pole lighting standards, free lighting design, provide IES file.

Product features

  • Professional LED high mast lights
  • Luminous efficiency:130-140LM/W
  • Wattage:100W-200W
  • Aluminum alloy shell, strong and not easy to be damaged
  • 5mm tempered glass, high light transmission rate
  • NICHIA chip Meanwell controller
  • Asymmetric lighting distribution
  • Intelligent control system. Standard on/off, DALI control, input 347-480V, remote drive
  • Easy to install, full technical support available
  • Product certification. TUV, CE, SAA, CB, DLC, UL, etc.

SHINETOO LED lighting manufacturer, with a professional R&D team and service team, supports OEM and ODM and other customised services.



Our asymmetric lighting distribution is uniquely designed to reduce glare while controlling the overflow of light with the use of indirect LED lighting technology. A 5 mm tempered glass lens is used to protect the LED cavity.


The thin profile, low copper die cast aluminum housing minimizes wind load. Powder coated inside and outside protects the housing from all types of weather.


7 years warranty.


The internal indirect reflector has a high reflectivity of 98%.Our V series reflector uses the latest PVD technology.


Fixtures comes standard with U-Bracket. Pipe slip fitter and yolk mounts are available upon request and will require MOQ. Custom mounting options can be made according to customer’s specifications MOQ will apply.


100W LED = 250W HID /MH /HPS

150W LED = 400W HID /MH /HPS

200W LED = 500W HID /MH /HPS




LED Chips




System Wattage






Lumen Output




Input Voltage

100-240/277 VAC, 50 / 60 Hz

IP Rating


IK Rating


Operating Temperature

-25°C to 45°C

Beam Angle



5 Year



Product video

Other LED flood lights

certification show

As the top manufacturer of LED flood lights in China, our LED flood lamps have complete certification and test reporting, such as ENEC, CE, CB, IECEE, SAA, ROHS, UL, IEC62471, LM80, LM79, and so on

R & D Team

Production Process

Frequently Asked Questions(FAQ)

A tennis court in a club used for championship or professional matches; Using 8 lights, 60,000 lumens. Because LED lamps are much more efficient than metal halide lamps, far fewer wattages are needed to achieve this brightness.

Tennis organization lighting requirements for professional players
For televised games, the minimum lighting level should average about 285 feet.”

It only takes a few seconds to go from light to light.

Relatively speaking, LED lighting completely outperforms metal halide lamps in terms of longevity, power saving, no UV radiation, IP65 and IP66, IK08 and IK10.
Many tennis courts are now in the process of replacing LED lights from metal halide, the sooner you replace them the sooner you benefit, not only do you get brighter lights and they last up to 50,000 hours and are very energy efficient and reduce maintenance costs, LED lights are a very good choice now and in the future.

Recreational tennis court (size is 36*18m), 6 x 6m high poles, using 6 x 300W LED lights. 2 recreational tennis courts, using 12 x 9m high LED poles, using 8 x 300W LED lights per tennis court, for a total of 16 x 300W LED lights.

The general installation height should be no less than 40 feet and no lower than the other lights in the facility.

According to our years of experience in the design of LED lighting, tennis courts with LED lights, generally using 300-500W wattage, can replace metal halide lamps wattage is 800W-1500W, can save a lot of electricity.

Scroll to Top

Contact Us

Catalog sent to e-mail