Jupiter-S LED Solar Bollard Light
- Pole Material:Aluminum 6063
- Operating Temp:-25℃ ~ +45℃
- LED Chips:Philips / Seoul
- Light Distribution:Asymmetric / Symmetric
- Design life:25 Years
- mounting options:direct bury base plate mount
- warranty:10 Years
SHINETOO LED lighting manufacturer, with a professional R&D team and service team, supports OEM and ODM and other customised services.
Our solar modules offer high resistance to vandals and the environment using and encapsulated approach that far exceeds the durability of typical solar modules.maintain operational longevity for 25+ years which reduces long-term operational expenditure and reduces excessive environmental waste in turn lowering disposal costs of our 100% recyclable components One of the key advantages of LED solar powered bollard lights is their energy efficiency. They are equipped with LED bulbs that require very little energy to operate, which means that they can run all night long without draining your electricity bill. In addition, they have a built-in solar panel that charges the batteries during the day, so they are ready to go as soon as the sun sets.
|Pole Material||Aluminum 6063||Aluminum 6063|
|LED Chips||Philips / Seoul||Philips / Seoul|
|Operating temperature||-25℃ ~ +45℃||-25℃ ~ +45℃|
|Color||3000K / 4000K / 5000K||3000K / 4000K / 5000K|
|Watt||Pmax 8W×1 / 8W×2 Monocrystalline||Pmax 17W×1 / 17W×2 Monocrystalline|
|IP&IK Protection||>IP65, IK10||>IP65, IK10|
|Warranty||10 Years||10 Years|
|Design life||25 Years||25 Years|
|Power Consumption||Factory Set 3W (1-5W adjustable at site)||Factory Set 1.5W|
all LED Solar Landscape Lighting Fixtures
Frequently Asked Questions(FAQ)
A tennis court in a club used for championship or professional matches; Using 8 lights, 60,000 lumens. Because LED lamps are much more efficient than metal halide lamps, far fewer wattages are needed to achieve this brightness.
Tennis organization lighting requirements for professional players
For televised games, the minimum lighting level should average about 285 feet.”
It only takes a few seconds to go from light to light.
Relatively speaking, LED lighting completely outperforms metal halide lamps in terms of longevity, power saving, no UV radiation, IP65 and IP66, IK08 and IK10.
Many tennis courts are now in the process of replacing LED lights from metal halide, the sooner you replace them the sooner you benefit, not only do you get brighter lights and they last up to 50,000 hours and are very energy efficient and reduce maintenance costs, LED lights are a very good choice now and in the future.
Recreational tennis court (size is 36*18m), 6 x 6m high poles, using 6 x 300W LED lights. 2 recreational tennis courts, using 12 x 9m high LED poles, using 8 x 300W LED lights per tennis court, for a total of 16 x 300W LED lights.
The general installation height should be no less than 40 feet and no lower than the other lights in the facility.
According to our years of experience in the design of LED lighting, tennis courts with LED lights, generally using 300-500W wattage, can replace metal halide lamps wattage is 800W-1500W, can save a lot of electricity.